background image

17

HOW TO MOVE THE ELLIPTICAL

Due to the size and weight of the elliptical, moving 
it requires two persons.

 Stand in front of the elliptical, 

hold the upright, and place one foot against one of the 
wheels. Pull on the upright and have a second person 
lift the handle until the elliptical will roll on the wheels. 
Carefully move the elliptical to the desired location, and 
then lower it to the floor.

HOW TO EXERCISE ON THE ELLIPTICAL

To mount the elliptical, hold the handlebars or the 
upper body arms and step onto the pedal that is in the 
lower position. Then, step onto the other pedal. Push 
the pedals until they begin to move with a continuous 
motion. 

Note: The pedals can turn in either direc-

tion. It is recommended that you turn the pedals 
in the direction shown by the arrow; however, for 
variety, you can turn the pedals in the opposite 
direction.

To dismount the elliptical, wait until the pedals come to 
a complete stop. 

Note: The elliptical does not have 

a free wheel; the pedals will continue to move until 
the flywheel stops.

 When the pedals are stationary, 

step off the higher pedal first. Then, step off the lower 
pedal.

Handlebars

Upper 

Body Arms

Pedals

Pull on the 

upright

Lift 

here

Place 

your foot 

here

Содержание E 8.0





































Отзывы: