NordicTrack Commercial 400, Руководство пользователя

Страница: 7 / 24

7
5. Tip: Avoid damaging the wires inside the Seat
Handlebar (11) during this step.
Attach the Seat Handlebar (11) to the Seat Carriage
(41) with two M8 x 68mm Button Bolts (70), two M8
Curved Washers (86), and two M8 Nylon Locknuts
(99). Make sure that the Nylon Locknuts are in
the hexagonal holes in the Seat Carriage. Then,
plug the Lower Pulse Wire (58) into the receptacle
in the Right Side Shield (14).
See step 3. Tighten the two M8 x 35mm Button
Bolts (72).
5
11
70
86
86
41
99
58
14
99
4
4. Orient the Backrest (8) as shown. Attach the
Backrest to the Backrest Tubes (52) with four
M6 x 38mm Button Screws (25) and four M6
Washers (88).
8
25
25
52
88
88
52