9
9.
Make sure that all parts are properly tightened before you use the treadmill.
Keep the included hex key
in a secure place; the hex key is used to adjust the walking belt (see page 27).
To protect the floor or carpet
from damage, place a mat under the treadmill.
8. Slide the Right Upright Sleeve (96) against the
console assembly. Attach the Right Upright
Sleeve with two 3/4" Screws (4).
Attach the Left Upright Sleeve (not shown) to
the Left Upright (73) in the same way.
7. With the help of a second person, raise the front
of the treadmill and insert the crossbar on the
Base (83) into the cutout in the cardboard stand
as shown.
Have the second person hold the
treadmill to prevent it from moving forward
or backward.
Firmly tighten the four Upright Bolts (72). With
the help of a second person, lower the treadmill
off the cardboard stand.
73
74
4
96
4
8
Cardboard
Stand
72
83
72
7
