7
2. Identify the Left Upright (73) and the Right
Upright (74).
See the inset drawing.
Tie the wire
tie in the Right Upright securely around the end
of the Upright Wire (75). With the help of a sec-
ond person, hold the Right Upright near the
Right Base Cover (77). Then, pull the other end of
the wire tie up through the bottom of the Right
Upright until the Upright Wire is routed com-
pletely through the Right Upright.
Gently pull up on the Upright Wire Harness (75)
as you set the Right Upright (74) on the Base
(83) inside the Right Base Cover (77).
Be care-
ful not to pinch the Upright Wire Harness.
Attach the Right Upright (74) to the Base (83)
with two Upright Bolts (72) and two Star
Washers (90). Note: It may be necessary to tip
the top of the Right Upright forward slightly as
you thread the Upright Bolts into the Right
Upright.
Do not tighten the Bolts yet.
Attach the Left Upright (73) to the Base (83)
in the same way.
Note: There are no wires on
the left side.
With the help of a second person, lower the
treadmill off the cardboard stand.
83
75
77
2
74
73
90
72
3. Identify the Right Upright Sleeve (96) and the
Left Upright Sleeve (95). Slide the Right Upright
Sleeve onto the Right Upright (74) and the Left
Upright Sleeve onto the Left Upright (73).
95
“Right”
“Left”
96
3
74
73
Wire
Tie
Wire
Tie
75
74