background image

3

SAVE THESE INSTRUCTIONS

    WARNING:

 To reduce the risk of burns, fire, electric shock, or injury to persons, read 

all important precautions and instructions in this manual and all warnings on your elliptical before 
using your elliptical. ICON assumes no responsibility for personal injury or property damage sus-
tained by or through the use of this product.

1.  It is the responsibility of the owner to ensure 

that all users of the elliptical are adequately 
informed of all precautions.

2.  Before beginning any exercise program, 

consult your physician. This is especially 
important for persons over age 35 or per-
sons with pre-existing health problems.

3.  Use the elliptical only as described in this 

manual. 

4.  The elliptical is intended for home use only. 

Do not use the elliptical in a commercial, 
rental, or institutional setting.

5.  Keep the elliptical indoors, away from mois-

ture and dust. Do not put the elliptical in a 
garage or covered patio, or near water. 

6.  Place the elliptical on a level surface, with at 

least 3 ft. (0.9 m) of clearance in the front and 
rear of the elliptical and 2 ft. (0.6 m) on each 
side. To protect the floor or carpet from dam-
age, place a mat under the elliptical.

7.  Inspect and properly tighten all parts regu-

larly. Replace any worn parts immediately.

8.  Keep children under age 12 and pets away 

from the elliptical at all times.

9.  When connecting the power cord, plug the 

power cord into a grounded circuit. 

10. Do not modify the power cord or use an 

adapter to connect the power cord to an 
improper receptacle. Keep the power cord 
away from heated surfaces. Do not use an 
extension cord.

11. Do not operate the elliptical if the power cord 

or plug is damaged, or if the elliptical is not 
working properly.

12.  

DANGER:

 

Always unplug the power 

cord and switch the power switch to the off 
position when the elliptical is not in use and 
before cleaning the elliptical. Servicing other 
than the procedures in this manual should 
be performed by an authorized service repre-
sentative only.

13. The elliptical should not be used by persons 

weighing more than 375 lbs. (170 kg).

14. Wear appropriate clothes while exercising; 

do not wear loose clothes that could become 
caught on the elliptical. Always wear athletic 
shoes for foot protection while exercising.

15. Hold the handlebars or the upper body arms 

when mounting, dismounting, or using the 
elliptical.

16. The heart rate monitor is not a medical 

device. Various factors may affect the accu-
racy of heart rate readings. The heart rate 
monitor is intended only as an exercise aid 
in determining heart rate trends in general.

17. The elliptical does not have a freewheel; the 

pedals will continue to move until the fly-
wheel stops. Reduce your pedaling speed in 
a controlled way.

18. Keep your back straight while using the ellip-

tical; do not arch your back.

19. Over exercising may result in serious injury 

or death. If you feel faint or if you experience 
pain while exercising, stop immediately and 
cool down.

IMPORTANT PRECAUTIONS

Содержание 831.23922.0













































Отзывы: