GB
8) Open the car door
Press on-off button outside the vehicle door sheet,
then pull the vehicle door outside and open the door.
IV. Installation and replacement of remote control batteries
Unscrew the battery cover screws of the remote control (part 22), open the battery cover, find the
positive and negative poles, put 2 AAA batteries into the battery compartment, close the battery
cover and fix it with screws.
V.
Function and Operation
1. Main functions:
1) There are remote controllable and pedal switch buttons.
2) Rear drive: Power motor gearbox provides powerful ”front or rear” power.
3) Forward / backward function: There are three forward speed level, neutral gear and reverse
gear on right side of the panel (each gear has its own LED display)
4) Foot switch function: Press the foot switch button, when the handle is in forward or backward
position, step down the foot switch to move the car forward or backward, and release the foot
switch to stop the car.
5) Charging protection function: All functions needing to be powered by the battery will fail when
the battery is being charged.
6) Forward / backward brake function: It has relay brake function whether it is moving forward or
moving backward or parking.
7) Turn the auxiliary pull wheel at the bottom of the car out, and turn the pull handle at the front
bottom of the car out to pull it away.
Press the
switch button
Black cable
Battery cover
2.4G remote control
The fixing glue meson
on the screw can
prevent the screw
from dropping out
Battery
Compartment
2 x 1.5V AAA Batteries
