Norcold NX61 Скачать руководство пользователя страница 56

Страница: 56 / 62

www.norcold.com/cda

Refrigerator Service Manual

NX6 / NX8 / NXA Models

NX64 / NX84, NXA64 / NXA84 Display Codes

Indicators and Status

Meaning

All indicators are off, except the green POWER ON indicator.

The controls have been inactive for more than 10 seconds

and are in a “sleep” mode. Press and release either the

MODE or the TEMPERATURE SET button to “wake” the

controls for ten (10) seconds.

Green POWER ON indicator is on.
AUTO indicator is on.
AC indicator is on.

The refrigerator is operating in Auto mode and is using AC

electric as the power source.

Green POWER ON indicator is on.
AUTO indicator is on.
GAS indicator is on.

The refrigerator is operating in Auto mode and is using

propane gas as the power source.

Green POWER ON indicator is on.
AC indicator is on.

The refrigerator is operating in Manual AC electric mode.

Green POWER ON indicator is on.
GAS indicator is on.

The refrigerator is operating in Manual propane gas mode.

Table 6: NX64 / NX84, NXA64 / NXA84 Display Codes

Shut Down:

To shut down the refrigerator, push and hold the POWER ON/

OFF button for one second and then release.

Modes of Operation NX64 / NX84, NXA64 / NXA84 - cont’d.

Содержание NX61































































Результаты поиска

Содержание NX61

Отзывы:

Бренды по названию

Популярные бренды

Norcold NX61, Руководство по обслуживанию

Результаты поиска

Содержание NX61

Отзывы:

Бренды по названию

Популярные бренды