Norcold N260, Руководство по обслуживанию

Страница: 12 / 14

12 - Service Manual N260 Series
Thermocouple
1. Close the valve at the main LP gas tank(s).
2. Remove the thermocouple from the thermocouple inter-
rupter.
3. Remove the burner box cover.
4. Remove the two screws that attach the thermocouple
bracket to the burner box.
5. Remove the thermocouple from the thermocouple bracket.
6. Remove the control panel from the back of the refrigerator.
7. To install the replacement thermocouple, do steps 1-6 in
reverse.
8. Examine all the LP gas connections for leaks.
Thermocouple interrupter
1. Close the valve at the main LP gas tank(s).
2. Remove the control panel from the back of the refrigerator.
3. Remove the thermocouple from the thermocouple inter-
rupter.
4. Remove the wires from the thermocouple
interrupter.
5. Remove the thermocouple interrupter from the safety
valve.
6. To install the replacement thermocouple interrrupter, do
steps 1-5 in reverse.
7. Examine all the LP gas connections for leaks.
Safety valve
1. Close the valve at the main LP gas tank(s).
2. Remove the control panel from the back of the refrigerator.
3. Remove the thermocouple from the thermocouple inter-
rupter.
4. Remove the wires from the thermocouple
interrupter.
5. Remove the thermocouple interrupter from the safety
valve.
6. Remove the LP gas outlet fittng from the safety valve.
7. Remove the safety valve from the thermostat.
8. To install the replacement safety valve, do steps 1-7 in
reverse.
9. Examine all the LP gas connections for leaks.
Refrigerator
1. Close the valve at the main LP gas tank(s).
2. Remove the LP gas supply line from the bulkhead fitting of
the refrigerator.
3. Remove the AC power cord from the receptacle.
4. Remove the DC input leads from the refrigerator.
- Put tape on the positive lead to prevent an accidental
electrical short and a blown fuse.
5. Remove the screws that attach the refrigerator to the floor.
6. Remove the screws that attach the refrigerator to the wall.
7. Remove the refrigerator from the opening.
8. To install the refrigerator, do steps 1-7 in reverse.
9. Examine all the LP gas connections for leaks.