Norco BIS-6540HD, Руководство пользователя

Страница: 48 / 86

BIS-6540HD
Based on Intel Atom Processor Full HD Compact Signage Platform
32
3. <PIO Mode>: Support PIO Mode0
～
Mode5(DMA/33). Use BIOS program to auto check the
HDD, this option of PIO mode will be set.
Important: If your system installed an IDE device (i.e. HDD, CD-ROM Driver), you should
go to the BIOS setting, and let the system auto detect the device. If you are using swapable
HDD, you can change the type to Auto, or set the Primary and Secondary to Auto. Here,
Primary means the fist IDE interface: IDE0 on the motherboard; and Secondary means the
second IDE device, and it refers to the IDE1 interface on the motherboard.
Every IDE device can have two IDE devices as Master/Slave.
Video
Select EGA or VGA display.option item
：
<EGA/VGA>
，
<CGA 40>
，
<CGA 80>
，
<MONO>.
Halt On
The item determines whether the computer will stop if an error is detected during power
up.
<No Errors>: The system boot will not stop for any error.
<All Errors>: Whenever the BIOS detects a non-fatal error the system will be stopped
<All, But Keyboard>: The system boot will not stop for a keyboard error; it will stop for all other
errors. (Default value)
Base Memory
The POST of the BIOS will determine the amount of base (or conventional) memory
installed in the system.
Extended Memory
The BIOS POST will determine the amount of extended memory (above 1 MB in CPU’s
memory address map) installed in the system.
Total Memory
This item displays the total system memory size.