Norco BIS-6540HD, Руководство пользователя

Страница: 35 / 86

BIS-6540HD
Based on Intel Atom Processor Full HD Compact Signage Platform
23
1
）
System Power LED Pins (J4 pin1,pin2 for PWLED)
Connecting system power LED cable and these pins, (pin 1 is LED anode),when system
power switch on, power LED on
；
When system power switches off, power LED off.
2
）
IDE LED Pins (J4 pin3,pin4 for HDD LED)
As a rule, there is a HDD LED on the panel of chassis, while HDD is reading or writing,
LED will flash, shows that HDD is running. Connect HDDLED on chassis panel and these pins
(pin3 is LED anode).
3
）
Reset Button Pins(J4 pin7,pin8 for RESET )
Connect this pins and RESET switch on panel of chassis with cable. When system can not
work on, reset can make system restart, without turning on/off the power, thereby it can prolong
system serviceable life.
4
）
Power On/Off Control Pins (J4 pin9,pin10 for PWRSW)
Connect these two pins with bounce switch on panel of chassis, can switch-on or
switch-off power.