Norco BIS-6540HD, Руководство пользователя

Страница: 40 / 86

BIS-6540HD
Based on Intel Atom Processor Full HD Compact Signage Platform
27
3.1.3
CF Card Master/Slave Selection
（
JCF
）
This jumper for setting CF card as master or slave, close JCF jumper (plug JCF cover), CF
card is set as master. When you need to set it as slave, open the cover please! Master for
default.
Setting JCF
Close Set CF card as master(default)
Open Set CF card as slaver
3.2 Installing the DDR SDRAM Memory Module
The BIS-6540HD provides one 200-pin SODIMM (Small Outline Dual Inline Memory
Module)socket,support DDR 400
Ⅱ ／
533MHz SDRAM memory up to 2GB.You can install from
512 MB up to 2 GB of DDR SDRAM memory. The procedure of installing a DDR SDRAM
Ⅱ Ⅱ
SODIMM into the BIS-6540HD is detailed below, please follow these steps carefully.
１：
Turn 0ff power
，
Remove the power line first
。
２： Twist off the screws of host bottom and front panel ， remove the top cover.
3
：
Twist off the screws of HDD bay
，
take out the 2.5” HDD bay.