Norco BIS-6540HD, Руководство пользователя

Страница: 37 / 86

BIS-6540HD
Based on Intel Atom Processor Full HD Compact Signage Platform
24
Chapter3 Hardware Installation
Prior to installation of computer accessories
：
To keep your computer from any potential damage and ensure your personal safety,
please follow the principle of securiety as below:
1) Make sure the computer doesn't connect to the power supply.
2) Wear anti-static gloves / bracelet would be preferable when touch intergrated circuit
components (such as RAM.)
３ .1 Setting Jumpers
Note:
Jumpers are located on the motherboard, they represent clear CMOS jumper JCC etc.
pin1 for all jumpers are located on the side with a thick white line refer to the motherboard’s
silkscreen , jumpers with three pins will be shown as 1-2 to represent pin1&pin2 connected and
2-3 to represent pin2&pin3 connected.
3.1.1 Clear CMOS （ JCC ）
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS; you can clear
the CMOS memory of date, time and system setup parameters by erasing the CMOS RTC
RAM data.the onboard button cell battery powers the RAM data in CMOS, which include setup
information such as system passwords.
To erase the RTC RAM:
(1)Turn OFF the computer and unplug the power cord.
(2)Move the jumper cap from pins 1-2(default) to pins 2-3.Keep the cap on pins 2-3 for about
5~10 seconds,then move the cap back to pins 1-2.
(3)Plug the power cord and turn ON the computer, Hold down the<Del> key during the boot
process and enter BIOS setup to re-enter data.
(4)Save CMOS value changes to CMOS and exit setup.