Norbec E-CIRCUIT, Руководство пользователя и инструкция по установке

Страница: 4 / 29

│ E-CIRCUIT –
Installation Guide and User Manual
4
Installation Guide – E-Circuit Retrofit
Installation of an E-Circuit Electrical System on an Existing Norbec CL Door
1. Remove the end stops at each end,
as well as the cast-iron latch stop.
2. Remove the door from the rail to gain access to the top of the door.
3. Screw in the motor mounting block
on the top of the door
@ 14 in. from the edge opposite the
opening.
6 × #14 self-drilling metal screws × 1-
in. hex head
4. Add the pulley assembly
2 × M8×1.25, 16 mm bolt
2 × M8 lock washer
5. Assemble the motor housing
2 × M8×1.25, 12 mm bolt
2 × M8 flat washer