Norbec E-CIRCUIT, Руководство пользователя и инструкция по установке

Страница: 21 / 29

│ E-CIRCUIT –
Installation Guide and User Manual
21
Partial Opening
By pressing the Partial button, the door will open partially based on parameter
LE
, the automatic closure
parameter is ignored, and the door stays open until another start command is received.
Flashing Light
The light under the motor housing provides visual information on the door’s operation.
- Door is open, the light will flash quickly for the time set in parameter
TF
, before starting the closing
movement.
- Flashes slowly during closing and opening movement.
- Stays lit during the setup phase.
- Lights up if power is lost.
- Lights up if the door is partially open.
- Lights up if the safety edge detects an obstacle.
Anti-Pinch Safety Edge (Standard)
The anti-pinch safety edge installed on the door serves as a mechanical safety edge. When the edge comes
into contact with an obstacle, the sensor makes the door stop the closing phase and reverse direction. The
sensor corresponds to NPN-type switch FT1.
Photoelectric Safety Barrier (Optional)
The photocell sensor installed on the door and the mirror installed on the frame serve as an invisible barrier.
When there is an obstacle in the doorway, the sensor makes the door stop the closing phase and reverse
direction. The sensor corresponds to PNP-type switch FT2.
Connection Procedure
Electrical Connections
- Before connecting the power supply,
make sure that the data on the
nameplate is compatible with that of
the distribution network.
- The system power supply must be
equipped with a circuit breaker in accordance with the regulations in force, located in an easily
accessible and clearly identified location.
- The power supply must be equipped with a grounding system that complies with the regulations in
force.
- During installation, maintenance, and repair work, disconnect the power supply before opening the
cover to gain access to electrical parts.