Norbec E-CIRCUIT, Руководство пользователя и инструкция по установке

Страница: 13 / 29

│ E-CIRCUIT –
Installation Guide and User Manual
13
Synchronization Procedure – Radio-Controlled (Optional)
START command option:
Radio-controlled button ↓ Radio-Controlled pull switch ↓
Setup Steps
1. Power up the system.
2. Open the motor housing cover.
3. Press button P1 on the internal radio receiver once.
4. The LED light will turn on.
5. Activate the START command on the remote control.
a. Button: Press for 2 seconds.
b. Pull switch: Pull for 2 seconds.
6. When the control is released, the LED light turns off, indicating that the remote control has been
memorized.
If the remote control is not recognized, the LED light stays on for 10 seconds.
7. Repeat the steps for each remote control.
Internal radio receiver