Noraxon U.S.A., Inc.
TeleMyo 2400T V2
Appendix B: Establishing a Measurement in MyoResearch or MyoClinical
To setup the software, open your Noraxon software (MyoResearch or MyoClinical). From the database
menu, select ‘Setup’ and then ‘A/D Setup’. The following screen will appear.
Under the Hardware section, press the pull down tab on ‘Device’ and ‘A/D Driver’ and select ‘TeleMyo
2400’ and ‘MYOAIRO wireless device’, as shown in the picture above. When finished, press ‘OK’.
Next, from the ‘Database Menu’, select ‘Measure’. The following screen will open.
In the Channels box, select the number of channels that will be used to acquire data. For one transmitter,
you may select up to eight channels. When using two transmitters, up to sixteen channels can be selected.
For three transmitters, up to twenty four channels can be used.
P-2308TV2 Rev G (06-06-11)
50
