AMTI Force Plate System Setup Guide
7
(Rev B)
Step 3
The AMTI settings dialog will be shown. Choose
Detect
to
detect the connected force plate(s). Here you can also
choose the desired sample rate.
If you would like to synchronize with other devices, check
the box that says “Use Noraxon MyoSync.”
4.2 Analog Integration
Before the AMTI system can be used, the device software settings must be configured to recognize the different
components that make up the system. Follow the instructions below to recognize the AMTI plates through the AIS and
configure the force plate and calibration settings.
Step 1
Open MR3, typically listed under
Noraxon -> MR3
Click on the
Hardware Setup
button in the upper right-
hand corner.
Step 2
Select the AIS icon, within the
‘New Device’
column,
and click on the
Insert
button.
