AMTI Force Plate System Setup Guide
4
(Rev B)
2 Installing the Hardware
2.1 Digital Integration
Please reference the diagram below to ensure proper connections.
Note: If using 2 or more force plates, they should be connected to the PC through the provided, powered USB hub.
Step 1-
Plug the AMTI force plate into the Gen5 or Optima amplifier.
Step 2
–
Attach the power supply to the Optima Amplifier.
Step 3
–
Insert the USB A to B cable to the Digital Output port on the amplifier.
Connect the other end to and USB port on the PC.
Step 4 (optional)
–
Connect the RCA adapter to the Sync cable (CBL12). The RCA cable will connect to the Gen5 or Optima amplifier.
Insert the other end of the Sync cable into any Sync out port on your
Noraxon MyoSync Station
.
Note: The sync cable and the Noraxon MyoSync Station are not required for normal function. If you are synchronizing
the force plates with other hardware within your software, you will need the MyoSync Station.
Other hardware that may be included:
-
Powered USB hub (if using 2 or more force plates with Gen5 of Optima amp
If you are synchronizing with other hardware in MR3:
-
Noraxon MyoSync Master Station
-
USB A to B Cable (Part# CBL17)
-
3.5 mm stereo cable (Part# CBL12)
