NorAM 65E Turbo, Руководство оператора

Страница: 68 / 118

1
NORAM 65ET GRADER
3-6
Lubrication and Maintenance
3
10 HOURS OR DAILY
Operation 1 - Check Engine Oil ( Cummins engine is the left picture and Cat engine is the right picture.)
1. Park machine on a level surface. Allow engine oil to drain into the sump for 15 minutes after the engine has stopped
before checking level.
2. Unlock and open left side engine access panel. Remove dipstick, 1, and check level. Oil level should be above
minimum mark and below maximum mark.
3. Remove fill cap, 2, and add or remove oil to obtain proper fill level between minimum and maximum marks.
NOTE: The amount required to change the level from the minimum mark to the maximum mark is 0.95 L (1 qt).
CUMMINS ENGINE CAT ENGINE
Operation 2 - Check Engine Coolant
WARNING:
COOLING SYSTEM IS PRESSURIZED. DO NOT REMOVE RADIATOR CAP WHEN HOT.
CAUTION:
COOLANT SHOULD BE KEPT OFF SKIN. ADHERE TO PRECAUTIONS OUTLINED ON
COOLANT FILTER AND ANTI-FREEZE CONTAINER.
Check coolant level with engine cold.
1. Open access cover, 1, on top of engine cover.
2. Turn radiator cap, 2, slowly to remove any remaining pressure in
the system and remove. Check level visually. Coolant level should
be even with the bottom of the fill tube.
IMPORTANT:
Use a 50:50 mix of high quality antifreeze and
clean water for maximum coolant performance.
3. Install and tighten radiator cap.
1
2
2
1
1
2