39
The product can also connect TV in the living room with computer in the study
through wire network connection, thus wonderful movies shared in the computer
can be played in the large TV screen, creating a new experience of home theater.
Wireless Setup
If it is the first time for you to use wireless network function, please do the following
setting:
Access your player to the Local Area Network (LAN), and press
“
Setting
”
in the remote
control to enter the player
’
s setting interface.
1.
Select
“
Network
”
and enter "Wireless network setting", choose the file name of the
connecting configuration. Then the clue of
“
Press
‘
ENTER
’
in the remote control to
connect, and press
‘
ENTER
’
to test the selected connection
”
will show on the lower
part of the screen. Press
“
ENTER
”
to connect. There are two connection modes to
choose: "AP" and
“
Ad Hoc
”
.
2.
If select
“
AP
”
mode, the player can detect wireless signal sources within the
searching scope of the configured wireless network card and the interface will show
all the detected wireless SSID.
3.
If select
“
Ad Hoc
”
mode, the player can access to sharable content in specific
objects. For example, the product and computers can connect and exchange data
through choosing
“
Ad Hoc
”
mode without using wireless Routers.
4.
Connect the product
’
s antenna with a USB wireless network card, put through the
antenna, and then you can set the wireless network according to the following steps.
If no external antenna is configured to the product, a USB wireless network card
that supports 802.11 b/g/n protocol will be needed to insert into the USB HOST
interface of the product. Then
“
WIFI PLUG IN
”
will show on the screen. Thus you
can start to set the product
’
s wireless network. The following is detailed description
for the operations of two wireless network connection modes:
Infranstructure(AP) setting
