13
When highlight move the
“
Format
”
key, Press
“
OK
”
to start. Otherwise, select
“
Back
”
key
to back..
Step 3: Completing HDD Format.
When HDD format is finished , the system will be retarted to access to the product
’
s main
interface.
2. Recording
When using recording function , there are two input sources for recording : video and
DTV . Press the "AV/TV" by Remote control key to switch between different input
sources. AV IN mode and tunner mode are the two ways for recording.
a.
TV IN mode(DVB-T signal input)
ANT IN interface can receive DVB-T digital television signal.Please refer to the below
connection.After accessing to the television signal, press SETUP key into the interface
settings,select TV option to begin setting(referring to the previous chapter
“
Connection
methods to watch TV and usage
”
).After setting ,you can watch the television
programme,
Press
“
REC
”
key on the Device or remote control, the
“
REC
”
LED on front panel of
recorder turns red which shows the starting of recording. Press REC key repeatedly,and
it can swtch the recording time(
ORT30min, ORT60min, ORT90min).
Press the
“
■
”
key on
remote control or device to stop recording.
Watching while recording
When you
’
re watching one channel, you can also record another channel
’
s program at
the same time. When your TV receives television signal ,enter DTV interface and press
REC key to start recordding,and a red round point will display on the upper right corner
of the screen.
If you press ENTER key, the screen will display the PR menu as following.Press
/
key to select the channel you want to watch. Then press ENTER key to confirm. Thus
you can watch one channel
’
s program while recording another channel.
