NOMACORC NomaSense CO2 P2000, Руководство пользователя

Страница: 9 / 12

8
General
CAUTION!
Personnel performing
any cleaning or maintenance
must familiarize themselves with
the “Safety Instructions” before
attempting any of these
procedures.
Cleaning
All of the device’s surfaces must only be
cleaned using a mild soap solution and a
soft wrung cloth.
CAUTION! Never use hard tools or abrasive
materials when cleaning any part of the
device.
Never use cleaning agents containing any
kind of acid. These constitute a health hazard
and could damage the instrument.
If there is any dirt or fluid in the measuring
gas hose (17), it can be cleaned using dry
compressed air.
CAUTION!
When using
compressed air for cleaning, the
hose must be disconnected from
the device.
Replacing needles, filters and valves
During use of the device particles or liquids
may over time be sucked through the
measuring gas system.
Therefor it will be necessary to replace both
the needle (5), the needle pen (16), the filter
(6), and the valve (7).
See “Consumables” for further details.
Cleaning and maintenance
Battery pack Battery pack
Left side Left side
Right-hand Left-hand
Right side Right side
Pump Pump
Gas OUT Gas OUT Gas IN Gas IN
CO
2
Sensor
CO
2
Sensor
14 14
1
15
1
14
15
5 7 16 6
17