Nolan N43E, Инструкции по безопасности и эксплуатации

Страница: 12 / 76

INSTRUCTIONS FOR USE
• VISOR REMOVAL
1 Lift and remove the safety cover from the latch as shown in Fig. 1 A, rotate the latch
90° towards the front part of the helmet (see Fig. 1B).
2 Remove the latch from the helmet by pulling it outwards so that the latch inner bayo-
net “A” comes out of its housing in the visor mechanism (see Fig. 2).
3 Follow the same steps on the right side of the helmet.
4 Remove the visor by holding the side end of the visor and bending it outwards so that
the hole “B” of the visor comes unhooked from the visor mechanism and the inner pawl
“C” inside the visor comes out of its housing in the visor mechanism (see Fig. 3).
• VISOR ASSEMBLY
1 Place the visor on the left visor mechanism paying particular attention to insert the
visor inner pawl “C” next to the lower part of the visor mechanism and the hole “B” on
the special circular projection of the same mechanism (see Fig. 3).
2 Place the left side latch on the visor mechanism and insert the inner bayonet “A” in its
special housing in the side mechanism (see Fig. 2).
3 Turn the latch 90° towards the rear part of the helmet. Carry out this operation by push-
ing the latch towards the inside of the helmet. Fix the latch by positioning the safety
cover (see Fig. 1 A). Make sure the cover is firmly attached to the latch.
4 Follow the same steps on the right side of the helmet.
WARNING!!!
- Make sure that the system is working properly. Open and close the visor making sure
that the mechanism holds it in the different positions.
- Do not use the helmet if the visor has not been assembled properly.
- If the visor opening/closing mechanisms are not working properly or if such mecha-
nisms get damaged, please contact a Nolan authorized dealer.
• VISION PROTECTION SYSTEM (VPS)
The new and exclusive inner Vision Protection System (VPS) is a scratch-resistant coat-
ed, moulded,
sunscreen. Its use is simple and practical: Just pull it down or up to
respectively activate it or remove it from the field of vision. It is useful in all sorts of situa-
tions, both on long journeys out of town and shorter town trips.
Moreover, the innovative fastening system allows you to assemble and disassemble
the sunscreen without the need for any tools for ordinary maintenance and cleaning
operations.
®
12