The Recovery Speed setting adjusts the speed of target
response.
It allows for separation between multiple targets in close proximity.
Recovery Speed setting enables you to detect smaller targets
among trash or ferrous targets.
The LEGEND Recovery Speed setting can be adjusted between 1
and 10 with 1 being the slowest and 10 being the fastest.
Recovery Speed setting only affects the mode
currently selected; changes made in one mode do
not affect the others.
When the Recovery Speed setting is set to a low number, the ability
of the device to detect targets in close proximity decreases but its
depth increases.
Similarly, a high Recovery Speed setting (for example 10) will
increase the ability of the device to detect targets in close
proximity but will decrease the depth.
It is recommended that you practice with different metals placed
close to each other before starting to use this setting.
Adjusting the Recovery Speed
1. Press the Power & Settings Button once. Select the Recovery
Speed setting using the left and right buttons. The current value
will be displayed on screen.
2. Change the value of the Recovery Speed using the plus (+) and
minus (-) buttons.
3. Press the Power & Settings Button once to go back to the main
screen.
IMPORTANT!
Increasing the Recovery Speed allows for a
faster sweep rate with less chance of missing targets.
Increasing Recovery Speed at the same sweep rate will help
to eliminate ground noise but it will decrease detection depth.
If you encounter high levels of ground noise on beach sand or
underwater, try increasing the Recovery Speed .
Default Recovery Speed Settings
It is used to eliminate the electromagnetic interference that
the device receives from another detector which operates in
the same frequency range nearby or from the surroundings
(high voltage power lines, cellular base stations, wireless
radios and other electromagnetic devices).
There are 13 channels available for all frequencies including Multi
frequency. The central frequency is 7 for all frequencies.
Frequency Shift only affects the mode currently
selected; changes made in one mode do not affect
the others.
If too much noise is received when the search coil is lifted in the
air, this may be caused by the local electromagnetic signals or high
sensitivity level.
To obtain maximum depth performance, to eliminate the noise
caused by electromagnetic interference, try shifting the frequency
first before decreasing the sensitivity.
Detectors may become noisy due to electrical interference and may
exhibit erratic behavior such as loss of depth or unstable target ID.
The Frequency Shift setting allows you to slightly shift the detector
transmit frequency to eliminate unwanted noise.
Frequency Shift can be done in 2 ways in The LEGEND: Manual
and Automatic.
In the manual Frequency Shift, the operator listens to each channel
and selects the one with the least noise.
In the automatic one, the device scans all the channels and picks
the least noisy one itself. This feature is often referred to as Noise
Cancellation as well.
Shifting the Frequency
1. Hold the coil stationary and away from the ground.
2. Press the Power & Settings Button once. Select the Frequency
Shift setting using the left and right buttons. The current channel
will be displayed on screen.
Manual Use
1. Using the plus (+) and minus (-) buttons, go through the frequency
channels.
2. Select the one you think is the one with the least interference.
Automatic Use
1. Press the Pinpoint & Accept/Reject Button once.
2. The device will start scanning all the channels and each channel
number will be displayed on screen.
3. When the process is done, automatically selected channel
number will be displayed and a confirmation sound will be heard.
Press the Power & Settings Button once to go back to the main
screen.
IMPORTANT!
Automatic Frequency Shift selects the quietest
channel based on various criteria. However, sometimes the
selected channel may still present some noise.
1. Frequency Shift
2. Recovery Speed
Low Recovery Speed
Medium Recovery Speed
High Recovery Speed
PARK
FIELD
BEACH
GOLDFIELD
5
5
5
5
Recovery Speed
Search Mode
15
Park
Goldfield
Beach
Field
Park
Goldfield
Beach
Field
