PAGE 1 OF 9
0621 IS-21664
HANDHELD METAL
DETECTOR
1-800-295-5510
uline.com
S-21664
COMPONENTS / FUNCTION
3-WAY POWER SWITCH
The 3-way power switch has two on positions and a
central off position. When the power switch is pressed
forward, the metal detector will sound an audible alert
upon detection of any metal and the red light alert
will appear. When the switch is pressed backward, the
metal detector will vibrate upon detection of any metal
and no sound will be heard, even though the red light
alert will appear. Power is turned off when the switch is in
the central position.
LED LIGHT ALERTS
The rear green light illuminates whenever the detector
is on. The red light, forward-most of the three lights,
illuminates whenever metal is detected. The center
amber light illuminates when battery power becomes
low and the battery should be recharged or replaced.
AUDIO ALERT
The speaker provides a clearly audible sound whenever
metal is detected. The audio alert sounds only when the
power switch is pressed forward.
VIBRATING ALERT
The vibration mode is activated when the power switch
is pressed backward. The unit’s handle will vibrate and
the red light will alert the operator whenever metal is
detected.
INTERFERENCE ELIMINATION BUTTON
The detector is factory set for a high level of sensitivity to
detect the smallest of items. This high level of sensitivity
may produce alarms when approaching a floor
containing rebar. Press and hold this button to decrease
sensitivity to a level that does not respond to the rebar.
Release button and detector returns to normal sensitivity.
3-Way Power Switch
(Audible-Off-Silent)
LED Light Alerts
Detection Coil
(Top and Bottom Surfaces)
Earphone/
Recharger Jack
Interference
Elimination Button
Internal Sensitivity
Adjustment (under grip)
Safety Sling
Battery Cover
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
