PAGE 3 OF 9
0621 IS-21664
The interference elimination button may be required if
floor rebar is present.
NOTE: Detection is only possible when the
detector is moving over a metal object.
DETECTION PRINCIPLES AND CAPABILITIES
The metal detector is an active handheld metal detector
with very high sensitivity to all metals, including ferrous,
non-ferrous and stainless steel. Detection and alarming
takes place when the instrument is passed in close
proximity to metal objects.
Detection range is dependent upon the size and
conductivity of the metal object. The larger the object,
the greater the detection distance.
The detector is factory preset to nominal sensitivity with
no operator adjustments required. This ensures that
the detector will be used at the proper operating level
established for the particular security need.
Should nearby, stationary metal objects (floor rebar,
metal walls or cell bars) cause interference to the
scanning process, an interference elimination button
is available to momentarily reduce sensitivity so as to
ignore the interfering nearby metal and permit precise
scanning of the individual or object being scanned.
When metal objects are encountered, the red LED is
activated along with an audible or vibrating alarm
(depending upon user setting). An optional earphone
may be used by the operator. Further convenient LEDs
include green for power on status and amber for low
battery indication.
RECOMMENDED BODY SCANNING PROCEDURE
Front Scanning
Back Scanning
Double check pocket areas.
1-800-295-5510
uline.com