It is the headlight used for lighting the area you are
scanning while detecting at night or in dark locations.
LED Flashlight does not operate when the device is off. It is
recommended to turn it on only when necessary since its opera-
tion consumes extra battery power.
LED Flashlight setting can be set to 0 (off) or to 1 (on). The LED
Flashlight will be off at each start up.
Turning the LED Flashlight On/Off
1. Press the Power & Settings Button once. Select LED Flashlight
using the left and right buttons. The current value will be
displayed on screen: 0 (off) or 1 (on).
2. Turn the flashlight on/off using the plus (+) and minus (-) buttons.
3. Press the Power & Settings Button once to go back to the main
screen.
When the LED Flashlight is on, the flashlight icon will be displayed
in the info section at the top of the screen.
This setting is used to turn on and off the wireless
Bluetooth® connection.
Bluetooth®setting can be set to 0 (off) or to 1 (on). When you turn
off and on the device, it will start with the last setting you chose.
Turning the Bluetooth®Connection On/Off
1. Press the Power & Settings Button once. Select Bluetooth®
using the left and right buttons. The current value will be
displayed on screen.
2. Change the value using the plus (+) and minus (-) buttons.
3. When the wireless connection is turned on, the Bluetooth Head-
phones icon will start blinking in the info section at the top of the
screen.
Once it pairs with any Bluetooth® headphones (Nokta Makro BT
Headphones or other), one of the icons below will be displayed in
the info section:
Standard Bluetooth® headphones connected aptX™ Low Latency
headphones connected.
3. Press the Power & Settings Button once to go back to the main
screen.
For more detailed info about the Nokta Makro BT Headphones,
please read the instructions included with the headphones.
8. LED Flashlight
9. Bluetooth®
The LEGEND has a built in clock that is located in the right
upper corner of the screen.
Setting the Clock
1. Press the Power & Settings Button once. Select the clock
setting using the left and right buttons.
2. The plus (+) icon will appear on the screen. Press the plus (+)
button once.
3. You will see numbers and a small line underneath them in the
upper right corner. The line will be under the clock section. Using
the plus (+) and minus (-) buttons, first choose between 24-hour or
12-hour clock options (if 12-hour clock is selected, letter A for AM
or letter P for PM will come up).
4. Then using the right and left buttons select the hour and
minutes and set the time using the plus (+) and minus (-) buttons.
5. Press the Pinpoint & Accept/Reject Button once to go back to
settings.
6. Press the Power & Settings Button once to go back to the main
screen.
10. Clock
25
