
1. BEFORE USE
MEASUREMENT UNITS
This Installation and Operating Manual utilises measurement units according to the
international SI measurement system.
DIRECTIONS
In this Installation and Operating Manual, the right and left side and front and rear end
of the machine are oriented from the driver perspective.
SERIAL NUMBER
Write down the serial number of your machine in the space reserved on page 26 of this
booklet. Be prepared to give the type and serial number of your machine in all enquiries
and orders relating to the machine.
SAFETY INSTRUCTIONS
NOTE!
The safety instructions in the booklet are marked with this sign. Read these instructions
with particular care.
1. Familiarize yourself with the operation manual and carefully read the safety
instructions and all labels on the machine. If the machine is to be used by another
party, make sure that the user reads the operating and safety instructions before
handing over the machine.
2. The operator must be at least 18 years old and in good health.
3. The operator must not be under the influence of any intoxicating substances or
medications.
4. Remove all loose parts from the machine which do not belong.
5. Fit the protective guards in place and ensure that they are always in place during
operation of the machine.
6. Get acquainted with all controls and instruments.
4