Nokia N75, Руководство пользователя

Страница: 123 / 297

Tool
s
90
Call settings
Send my caller ID —To set your phone number to be
displayed or hidden from the person to whom you are
calling, select
Yes or No . The value may be set by your
network operator or service provider when you make a
subscription (
Set by network ) (network service).
Call waiting —Activate this setting if you want the network
to notify you of a new incoming call while you have a call
in progress. To set the function on or off, select
Activate
or Cancel . To check whether the function is activated,
select Check status .
Reject call with SMS —Select Yes to send a text message
to a caller informing why you could not answer the call.
See "Answer or decline a call," p. 69.
Message text —Write a text to be sent in a text message
when you decline a call.
Automatic redial —Select On , and your device makes a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
press .
Summary after call —Activate this setting if you want the
device to briefly display the approximate duration of the
last call.
Speed dialing —Select On . To dial the numbers assigned to
the speed dialing keys ( — ), press and hold the key.
See also "1-touch dial a phone number," p. 68.
Anykey answer —Select On . To answer an incoming call,
briefly press any key, except , , , and .
Line in use —This setting (network service) is shown only if
the SIM card supports two subscriber numbers, that is, two
phone lines. Select which phone line you want to use for
making calls and sending text messages. Calls on both lines
can be answered irrespective of the selected line. If you
select
Line 2 and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
selected,
is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold in the standby mode.
Line change —To prevent line selection (network service),
select Disable if supported by your SIM card. To change
this setting, you need the PIN2 code.
Connection
Data connections and access points
Your device supports packet data connections (network
service), such as GPRS in the GSM network. When you use
your device in GSM and UMTS networks, multiple data
N75.EN_ESv1_BIL_9252942.book Page 90 Monday, April 2, 2007 3:31 PM