Copyright © 2006 Nokia. All rights reserved.
Connectivity
75
Bluetooth connectivity indicators
• When
is shown in the standby mode, Bluetooth
connectivity is on.
• When
is blinking, your device is trying to connect
with another device.
• When
is shown continuously, data is being
transmitted.
Tip!
To send text, open
Notes
, write the text, and
select
Options
>
Send
>
Via Bluetooth
.
1
Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, open
Gallery
.
2
Select the item and
Options
>
Send
>
Via Bluetooth
.
Devices with Bluetooth technology within range start
to appear on the display.
Device icons:
— computer,
— phone,
— audio
or video device, and
— other device.
To interrupt the search, select
Stop
.
3
Select the device with which you want to connect.
4
If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See
"Pair devices"
, on page
75
.
5
When the connection has been established,
Sending
data
is shown.
The
Sent
folder in
Messag.
does not store messages sent
using Bluetooth connectivity.
Tip!
When searching for devices, some devices may
show only the unique address (device address). To
find the unique address of your device, enter the
code
*#2820#
in the standby mode.
Pair devices
To open the paired devices view (
), in the
Bluetooth
application main view, press
.
Before pairing, create your own passcode (1—16 digits),
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
To pair with a device, select
Options
>
New paired
device
. Devices with wireless Bluetooth technology within
range start to appear on the display. Select the device, and
enter the passcode. The same passcode must be entered
on the other device as well. After pairing, the device is
saved to the paired devices view.
Paired devices are indicated by
in the device search.
To set a device as authorized or unauthorized, scroll to a
device, and
Options
>
Set as authorised
— Connections between your device
and this device can be made without your knowledge. No
separate acceptance or authorization is needed. Use this
status for your own devices, such as your compatible
9243184_N71-1_en_apac.book Page 75 Friday, May 26, 2006 2:31 PM