Installation
32 (72)
© Nokia Corporation
DN991456
Nokia Proprietary and Confidential
Issue 3 en
Fixing the mounting rack to the wall
1.
To define clearances required around the BTS, cut the template out of the
packing cardboard by following the dotted line (see Figure 6).
2.
Find a wall area which is large enough to cover all parts of the template and
place the cardboard template on the wall at the required height. Use a spirit
level to check that the template is in a straight position.
3.
Mark the fixing points on the wall for the upper screw holes of the
mounting rack (R1 and R2, see Figure 5). For example, use a centre punch
through the template to mark the fixing points.
4.
Drill holes R1 and R2 in the wall and clean them out. Insert anchor plugs
(or an appropriate counterpart, depending on the material) into the wall.
5.
Position the mounting rack in the correct location on the wall and attach it
with screws through holes R1 and R2 (see Figure 7). Use a spirit level to
set the mounting rack straight (adjustment is possible due to the oval shape
of holes R1 and R2). Tighten the screws when the rack is level.
6.
Drill screw holes for the lower anchor screws through the holes marked R3
and R4 in Figure 7. Insert the anchor plugs (or appropriate counterparts)
into the wall.
7.
Position the rectangle shaped washer over screw holes R3 and R4 and
insert and tighten the screws.
All manuals and user guides at all-guides.com
