GB 26
MAIN MENU
Appearance Preferences
Banner time-out
When you switch channels, an information banner will be shown
for a few seconds. You can select for how long the banner will
be shown.
Volume bar
Select whether or not you want the volume bar to appear on the
screen when you change the volume.
Volume bar time-out
Select how long the banner will be visible on the screen.
Parental Control
To open this menu you will be asked to enter your access code.
From the factory the access code is set to 1234
.
The following settings can be altered from this menu.
Receiver lock
If you select “On,” you will have to enter the access code every
time you start the Mediamaster from stand-by.
Age Rating Control
If you want everybody to have access to all available types of pro-
grammes, select “Off.”
If you select “On,” you may block programmes unsuitable for
children. Select an age limit between 4 and 18 years on the line
that appears.
However, you should be aware that not all Service Providers have
the necessary codes for these functions implemented in their
transmissions.
Change access code
From here you can change the access code from the standard
1234. DO NOT FORGET IT! Without it you do not have access
to any of the functions where the code is required!
Subtitles
Select whether or not subtitles will be visible on the screen.
