Nokia Mediamaster 220S, Руководство пользователя

Страница: 19 / 36

GB 19
FIRST TIME INSTALLATION
Channel search
The Channel search procedure can be performed in different
ways.
Automatic search
• Press OK to start searching for channels.
Manual search
The information you need to enter in this menu is available in
magazines covering satellite TV reception or on the Internet.
Transponder frequency : Specify the frequency in GHz with the
numeric buttons. If you enter the wrong value, erase with the
button.
Polarisation : Select Horizontal, Vertical, Circular left or Circular
right.
Symbol rate : Specify the symbol rate with the numeric buttons.
If you enter the wrong value, erase with the button.
FEC : Select “Auto” or any of the preprogrammed values.
Network search : Select “Yes” if you want to search on all trans-
ponders connected to a specific network.
• Press OK to start searching for channels.
Mini DiSEqC Switch
Select this alternative if your antenna system has two LNB:s and
a Mini DiSEqC Switch (Tone burst).
The procedure is the same as for two port DiSEqC as described
on page 17-18.
Channel search in progress
This menu will be shown as long as the Mediamaster is search-
ing for TV and radio channels.
All channels found will be listed on the screen.
Please note that the search procedure may take a few minutes.
You can cancel the search at any time by pressing
OK .
When the search procedure has ended, a message will tell how
many TV and radio channels have been found.
• Press OK to continue.