GB 10
*
The LNB cable also feeds the LNB with a supply voltage of 13/18 V (V/H po-
larisation) and a 0/22 kHz signal (bandswitch). Max LNB current is approxi-
mately 500 mA.
ANTENNA *
for LNB input
from the satel-
lite dish (F-con-
nector)
Rear panel
Front panel
FRONT AND REAR PANEL
Function
ON
Standby
Locked to channel
No signal
Remote control feedback
SW download
Error
Modem on line
Modem connecting or disconnecting
TV release
LED indicator 1
Green
Red
Green
Green
-
Continuous green flashing
Continuous red flashing
Continuous slow green flashing
Continuous fast green flashing
Green
LED indicator 2
-
-
Green
Red
Single flash
Continuous green flashing
Continuous red flashing
-
-
-
to put the Mediamaster in and out of standby mode
to change channels
and to move in menus
Indica-
tor 1
Indica-
tor 2
Slot
for inserting of a
Viaccess smart card
Slot
for a CA module
with a smart card
Button
push the button to release an
inserted CA module
Lid
open the lid in order
to insert the CA
module and the
smart card
AUDIO L R
RCA connectors
for stereo output to an
analogue HiFi system
TV SCART
for connection
to the TV
AUX SCART
for connection to a VCR
or a satellite receiver
DIGITAL AUDIO
RCA connector
for S/PDIF digital
output to a HiFi sys-
tem
Mains cable
110-240 V AC
SERIAL PORT
for connection to
a PC
TELEPHONE
for connection
of a modem
cable to the
phone jack
Содержание Mediamaster 220S
Страница 1: ...User Guide ...
Страница 36: ...Nokia is a registered trademark of Nokia Corporation www nokia com 667698521 01 ...