Configuring and Activating Interfaces
Nokia IP300 Series Security Platform Installation Guide
43
11.
Tighten the retaining screws that hold the chassis assembly.
The appliance automatically restarts when the chassis assembly clicks into
place.
Configuring and Activating Interfaces
The IP300 Series appliance automatically detects any new NIC when the
appliance is restarted. Use Network Voyager to configure and activate the
logical and physical interfaces on the NIC.
For information about how to access Network Voyager and the related
reference materials, see
“To open Network Voyager”
on page 30.
Monitoring Network Interface Cards
You can asses the general operating condition of the NICs in your appliance
by looking at the LED status indicators on the NICs. The status indicators for
each NIC are explained in the NIC reference chapter.
For the status indicator information for the built-in Ethernet ports or the two-
port Ethernet NIC, see
“Four-Port and Two-Port 10/100 Mbps Ethernet
Interface, PMC”
on page 46.
Use Network Voyager to access detailed port information. For information
about accessing Network Voyager, see
“Accessing Nokia Network Voyager”
on page 30. You can also use the IPSO tcpdump command to examine the
track on a specific port.
Chassis assembly retaining screws
All manuals and user guides at all-guides.com
all-guides.com
