manualshive.com logo in svg

Nokia 616, Руководство по обслуживанию

Поделиться
Скачать
Nokia 616 Скачать руководство пользователя страница 42

TFE-4/RV-1

3 - Service Software

Nokia Customer Care

Page 3-4

 Copyright 

©

 2005 Nokia Corporation

Issue 2.0 Mar/2005

Company Confidential

•

Flash update package files for FPS-8* and FLS-4S programming devices

•

All needed drivers for:

DK2 dongle
FLS-4S point of sales flash device
USB devices

Separate installation packages for flash update files and drivers are also available, but it 
is not necessary to use them unless updates appear between Phoenix Service SW 
releases. If separate update packages are used, they should be used after Phoenix and 
data packages have been installed.

The phone model specific data package includes all changing product specific data:

•

product software Binary files

•

files for type label printing

•

validation file for the Faultlog repair data reporting system

•

all product specific configuration files for Phoenix software components

Please refer to Service Manual and Service Bulletins for more information concerning 
phone model specific service tools and equipment setup.

Phoenix Service SW and phone data packages should only be used as complete installa-
tion packages. Uninstallation should be made from Windows Control Panel.

Phoenix Service SW

Before installation 

•

Check that a dongle is attached to the parallel port of your computer.

•

Download the installation package (e.g.

 

phoenix_service_sw_a12_2004_46_4_75.exe

) to your computer (e.g. 

C:\TEMP). 

•

Close all other programs.

•

Run the application file (e.g.

 phoenix_service_sw_a12_2004_46_4_75.exe

)

 

and follow instructions on the screen.

Administrator rights may be required to be able to install Phoenix depending on the 
Operating System.

If uninstalling or rebooting is needed at any point, you will be prompted by the Install 
Shield program.

If at any point during the installation you get this message, the dongle is not found and 
the installation can not continue. 

Possible reasons may be defective or too old PKD-1Dongle (five digit serial number don-
gle when used with FPS-8 Prommer) or that the 

FLS-4S

 POS Flash Dongle is defective or 

power to it is not  supplied by external charger. 

 

Содержание 616





























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды