S e t t i n g s
48
Default profile
— to select the profile that you want to be automatically activated
when you connect to the selected enhancement
Automatic answer
— to set the phone to answer an incoming call automatically
after five seconds. If
Incoming call alert
is set to
Beep once
or
Off
, automatic
answer is off.
Lights
— to set the lights permanently
On
. Select
Automatic
to set the lights on
for 15 seconds after a key press
Ignition detector
>
On
— to automatically switch off the phone approximately
20 seconds after you switch off the car ignition, when the phone is connected to
the full car kit
TTY/TDD
>
Use TTY
>
Yes
— to use text phone settings instead of headset settings
■
Configuration
You can configure your phone with settings that are required for certain services
to function correctly. The services are multimedia messaging, instant messaging,
synchronization, streaming, and browser. Your service provider may also send you
these settings as a configuration message.
To save the configuration settings received as a configuration message, see
”Configuration settings service,” p. 9.
Select
Menu
>
Settings
>
Configuration
and one of the following options:
Default configuration settings
— to view the service providers saved in the
phone. Scroll to a service provider, and select
Details
to view the applications
that the configuration settings of this service provider supports. To set the
configuration settings of the service provider as default settings, select
Options
>
Set as default
. To delete configuration settings, select
Delete
.
Activate default in all applications
— to activate the default configuration
settings for supported applications
Preferred access point
— to view the saved access points. Scroll to an access
point, and select
Options
>
Details
to view the name of the service provider, data
bearer, and packet data access point or GSM dial-up number.
Connect to service provider support
— to download the configuration settings
from your service provider, if this is supported by your service provider
Personal configuration settings
— to add new personal accounts for various services
manually, and to activate or delete them. To add a new personal account if you have
not added any, select
Add new
; otherwise, select
Options
>
Add new
. Select the
service type, and enter each of the required parameters. The parameters differ
according to the selected service type. To delete or activate a personal account,
scroll to it, and select
Options
>
Delete
or
Activate
.
