Nokia 6090, Руководство по управлению

Страница: 57 / 84

Nokia 6090 AT Command Set 55
+GMM Request TA Model Identification
This command displays the TA model identification. TA and ME are in the same
physical entity, the response of the cCGMM is identical. (V.25ter)
Syntax:
AT+GMM Display model identification.
Response is Nokia 6090 - GSM900 Fixed
Mobile Phone
+GMR Request TA Revision Identification
This command displays the TA revision identification. Response is Nokia 6090 SW
version, HW version is not supported. TA and ME are in the same physical entity, the
response of the cCGMR is identical. (V.25ter)
Syntax:
AT+GMR Display revision identification.
+GSN Request TA Serial Number Identification
This command displays the TA serial number. TA and ME are in the same physical
entity, the response of the cCGSN is identical (i.e. the IMEI number).
(V.25ter)
Syntax:
AT+GSN Display serial number.
+ICF DTE-DCE Character Framing
This command is used to determine the character framing that the Nokia 6090 uses
while accepting commands and while transmitting information text and a result code
to/from a DTE. Note that reset commands Z and &F do not change this setting.
(V.25ter)
Syntax:
AT+ICF=[<format>[, <parity>]]
Recommended default is 3,3.
AT+ICF? Query current setting.
Response is +ICF: <format>,<parity>.
AT+ICF=? Show valid range of parameters.
Response is +ICF:(list of supported
<format>'s), (list of supported <parity>'s).
Parameters:
<format>
3 8 data, no parity, 1 stop
5
7 data, parity, 1 stop
6
7 data, no parity, 1 stop
<parity>
0
odd
1
even
2 mark
3 space