manualshive.com logo in svg

Nokia Mobile Phones NSE-5 Series, Руководство по обслуживанию

Поделиться
Скачать
Nokia Mobile Phones NSE-5 Series Скачать руководство пользователя страница 224

PAMS

Technical Documentation

NSE–5

Disassembly Instructions

Page   6

Issue 1 07/99

12.  Bend open one side of
      the (plastic) Slide Cover
     and take out the Metal
      Slide

! DO NOT !

Hold the Metal Slide like this.

The Metal Slide is bent very eas-
ily when it is not protected by the
phone. Avoid bending of the
Plungers at all times.

ALWAYS

Handle the Metal Slide like this.

The Metal Slide can be held by the 

Targa Bow or by one of

the Plungers.

Push the Metal Slide onto
the snap on one side of
the Slide Cover.

Push down the other
side, but do not hit the
middle snap.

Push the Metal Slide onto
the snap on the opposite
side. A click should be
noticed.

Fitting a Metal Slide onto a Slide Cover:

Содержание NSE-5 Series








































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды