Nokia Mobile Phones NSE-5 Series, Руководство по обслуживанию

Страница: 128 / 327

PAMS
Technical Documentation
NSE–5
Service Software Instructions
Page 28
Issue 1 07/99
Custom Dialog boxes
All custom dialog boxes will contain the predefined buttons as defined
below in the section –
Buttons.
The buttons are mainly positioned down the right–hand side of the dialog
boxes. The default action will be OK, except where that default action
could result in an irretrievable failure.
All tuning dialogs that contain tuning results, will display the old tuned data
read from the phone before the tuning was performed, as well as the
newly tuned data.
List boxes will be used to display lists of data, such as tuning data, test
results etc.
The use of radio buttons defines the number of possible choices available
to the user.
Buttons
All buttons are of the Microsoft style.
In general, the default button is the action button, the Close button or the
Yes button, but this will depend on the context of the dialog box that the
button is associated with.
(action) button:
Accepts and validates entered settings and values and closes
the dialog. If the values have not been changed, then no action
will be taken. The status bar will reflect the status. The user is
only queried, if the settings or values accepted will over–write
data that CAN NOT be reproduced.
A greyed action button indicates that settings selected by the
user are not acceptable.
Close button:
Closes the current dialog box. Does not send or store anything
and closes the dialog. The Close button is only used for dia-
logs that do not set or change any data.
Cancel button (Esc):
Cancel operation. Does not send or store anything and closes
the dialog box.
A greyed Cancel button indicates that it is not possible to quit
from this dialog box.
Yes button (ALT+Y or Y):
Replies Yes to a question asked of the user.