USE AND CONTROL
–
V41B
The Controls of Your Wine Cooler
POWER
To control this appliance turn on/off. To turn OFF the
appliance, touch and hold the
and
marks at
the same time for 5 seconds.
SET
To set or view the internal temperature setting for
each zone.
LIGHT
To control the inner light turn on/off.
UP
Used to raise (warm) the set temperature by 1°C or
1ºF.
DOWN
Used to lower (cool) the set temperature by 1°C or
1ºF.
ºF/ºC
Selector
Select the temperature display setting in Fahrenheit
or Celsius degree. To change the temperature from
Fahrenheit to Celsius or from Celsius to Fahrenheit,
press the
button for 5 seconds.
Setting the Temperature Control
The wine cooler has two temperature zones. The
temperature settings of LOWER ZONE and UPPER
ZONE are adjustable with the range 5º-22ºC/40º-
72ºF. It is recommended to set the LOWER ZONE
to 13-22ºC / 55-72ºF which is ideal for storing white
and red wines and the UPPER ZONE to 5-13ºC /
40-55ºF which is ideal for storing sparkling and
white wines.
NOTE: The temperature set for the LOWER
ZONE must always be the same or higher than
that in the UPPER ZONE. For optimal
performance, the set temperature of the two
zones should differ by at least 4°C.
x
You can touch
SET
mark to set the internal
temperature for each zone. The degrees
indicators will appear in the display window
marked
for UPPER ZONE and
for
LOWER ZONE.
x
When
you
touch
the
SET
mark for the
fi
rst time,
the LED readouts will show the original
temperature sets previously (the preset
temperature at the factory for UPPER ZONE is
10ºC / 50ºF and for LOWER ZONE is 16ºC /
60ºF).
x
Touch the
SET
mark once. The left LED
indicator for UPPER ZONE will flash. Then
touch the
UP
or
DOWN
marks to set the desired
temperature.
x
When you touch the
SET
mark again, the right
LED indicator for LOWER ZONE will flash. Then
proceed to touch the
UP
or
DOWN
marks to set
the desired temperature for the LOWER ZONE.
x
The temperature will increase 1°C or 1ºF if you
touch the
UP
mark once, or the temperature will
decrease 1°C or 1ºF
if you touch the
DOWN
mark once.
x
To view the “set”
temperature in either zone at
any time, touch the
UP
or
DOWN
mark
, the “set”
temperature will temporarily “
fl
ash” in the LED
display for 5 seconds. You can touch the
SET
mark to view the temperature setting from one
zone to the second zone.
Temperature Display
During normal operation, the temperature display on
the control panel shows the temperature inside the
appliance.
The temperature display will flash
if
-
A different temperature is being set,
-
The temperature in the zone deviates by more
than 5°C from the set temperature. The
temperature display flashing ensures that the
temperature can not rise or fall un-noticed and
impair the wine.
c
F
