Nodka TPC6000-C123-TH-BW5300U, Руководство пользователя

Страница: 33 / 80

TPC6000-CXX3 User Manual
33
2.7.4 VGA monitor connection
The VGA output can be connected to an external VGA monitor. To connect the VGA
monitor to the TPC6000-CXX3, please follow the instruction below:
Step 1
：
Located the female DB-15 connectors. The locations of the VGA
connectors are shown above.
Step 2
：
Align the connectors. Align the male DB-15 connector on VGA screen cable
with the female DB-15 connector on the external peripheral interface.
Step 3
：
Insert the VGA connector. Once the connectors are properly aligned with
the insert the male connector from the VGA screen into female connector on
the TPC6000-CXX3, please see the figure 2-16:
Figure 2-16
：
VGA connection
Step 4
：
Secure the VGA connector. Secure the DB-15 VGA connector from the
VGA monitor to the external interface by tightening the two retention screws
on either side of the connector.
2.8 Power connector
The power cable connects the panel PC to power supply. The power cable is required
for operation of the panel PC.
Step 1
：
Connect one end to the panel PC.
Step 2
：
Connect the other end to the included power supply.