NOCRY NOCRY37, Инструкция по эксплуатации

Страница: 26 / 36

24
your van, empty the container and clean it before transport.
The container does have an airtight seal though, so should you absolutely have to
go somewhere with your paint sprayer last-minute, you can rest assured that no
paint will leak. However, do secure your paint sprayer in a stable position, and
don’t let it lie it on its side with coating material inside the container.
HOW TO CLEAN THE
SPRAY ATTACHMENT
1
Disconnect your paint sprayer from the mains and make sure everything
is properly grounded.
2
Turn the spray attachment lock to the unlock point and pull the spray
attachment away from the main body.
3
Remove the container from the spray attachment and empty any
remaining coating material back into its original packaging.
4
Clean the outside of the container with a cloth soaked in solvent or water.
5
Pre-clean the inside of the container and the suction tube with the
included cleaning brush accessory and a suitable cleaning agent.
6
Clean the ventilation holes (the two tiny dents either side of the suction
tube) and any other hard-to-reach nook and cranny with the included
cleaning pin. There should be no dried paint still lodged in the nozzle
(check back to page 21 to see how to clean the nozzles), ventilation hose,
suction tube, or around the container seal. Rinse thoroughly with water.
7
Before using your sprayer again, ensure that it has dried completely, and
that all traces of any solvents have disappeared. Best leave it overnight
to be sure.
8
Once the container has fully dried, rinse it thoroughly with water again,
dry, and screw the container back onto the spray attachment.