NOCRY NOCRY37, Инструкция по эксплуатации

Страница: 29 / 36

27
Once clean, insert the suction tube back into the spray attachment, ensuring the
seal is, well, sealed. Run your fingers around the rim of the spray attachment,
pushing the seal upwards.
SOME TIPS ON TROUBLESHOOTING
If these tips do not help to solve the issue or you are having some questions, please
let us know to
wecare@nocry.com , and we’ll get right on it.
Malfunction Possible cause Possible remedy
The sprayer will not
start
v
No mains voltage
v
Check power supply
No coating material
emerges from nozzle
v
The nozzle is clogged
v
Clean nozzle head
with the included pin
v
The material volume
is set too low
v
Increase the material
volume
v
The paint container
seal is damaged
v
Replace the seal (if
you need help with this,
let us know to
wecare@nocry.com
)
v
There’s not enough
pressure build-up in the
container
v
Tighten the container
v
The container is
empty
v
Refill the container
with coating material
v
The feed tube has
come loose
v
Reinsert the feed
tube
v
The feed tube has got
clogged
v
Clean the feed tube
with the included brush
v
The air vent on the
feed tube is blocked
v
Clean the air vent
with the included brush