Nobles Speed Scrub Orbital, Руководство по эксплуатации

Страница: 14 / 86

OPERATION
14
Nobles Speed Scrub Orbital (12--2012)
BATTERY METER
The battery meter displays the charge level of the
batteries. When the batteries are fully charged, all
indicator lights will glow. As the batteries discharge, the
indicator lights will begin to go out from right to left.
NOTE: To prolong the life of the batteries ONLY
recharge the batteries when the machine is used for a
total of 30 minutes or more.
When the discharge level reaches the last red light
(Figure 23), stop scrubbing and recharge the batteries.
If you continue to operate the machine beyond the first
red light, the scrubbing function will automatically shut
off when the last red light begins to blink. This protects
the batteries from total discharge. Drive the machine to
the charging area and recharge the batteries
immediately.
NOTE: The battery meter also displays machine fault
codes. If a fault is detected the LED bars will flash
specific fault codes (See BATTERY METER LED
FAULT CODES on page 29).
Stop scrubbing and
recharge batteries
FIG. 23
CIRCUIT BREAKER / FUSES
The machine is equipped with a resettable circuit
breaker to protect the pad motor from damage. The
circuit breaker button is located on the control panel
(Figure 24). If the circuit breaker should trip, determine
the cause, allow the motor to cool, and then manually
reset the circuit breaker button.
The machine is also equipped with three fuses located
inside the control console: 30A Main fuse, 25A vacuum
motor fuse, and a 10A ec--H2O pump fuse. When
replacing a fuse never substitute a higher Amp rated
fuse than specified.
Contact an Authorized Service Center for machine
repairs.
FIG. 24
HOUR METER
The hour meter records the number of total hours the
motor has been powered on. Use the hour meter to
determine when to perform recommended maintenance
procedures and to record service history (Figure 25).
FIG. 25