manualshive.com logo in svg

Nobles SPEED SCRUB 350, Руководство оператора

Поделиться
Скачать
Nobles SPEED SCRUB 350 Скачать руководство пользователя страница 48

48

Speed Scrub 350 9016424 (09-2017)

MAINTENANCE

  BRUSH AND PAD REPLACEMENT

Replace the pads when they no longer clean 
effectively. Replace the brushes when they no 
longer clean effectively.

Cleaning pads must be placed on pad drivers 
before they are ready to use. The cleaning pad is 
held in place with a center disk. Both sides of the 
pad can be used for scrubbing. Turn the pad over 
to use the other side.

Cleaning pads need to be cleaned immediately 
after use with soap and water. Do not wash the 
pads with a pressure washer. Hang pads, or lay 
pads 

fl

 at to dry.

NOTE: Always replace brushes and pads in 
sets. Otherwise one brush or pad will be more 
aggressive than the other.

1.  Stand with both feet on the operator presence 

pedal (do not press the go pedal), turn the 
key to the ON position, and press the brush 
change button to raise the scrub head to the 
correct level for changing the brush(es) or 
pad(s).

NOTE: Remain standing on the operator presence 
pedal until the scrub head has moved through the 
entire range of motion. Process will be paused if 
the operating presence pedal is released. Step 
back onto the operator presence pedal and press 
the brush change button again to continue the 
process. Turn key switch to OFF position to abort 
process.

2.  Release the operator pedal when the green 

LED stops 

fl

 ashing and remains illuminated 

solid green.

3.  Machines equipped with magnetic brush 

hubs:

 Remove the brush or pad driver from 

under the scrub head.

WARNING: Magnetic Field Hazard. 
Magnetic pad driver/brush can be 
harmful to pacemaker wearers or 
medical implants.

Machines equipped with 3-lug brush hubs:

 

To remove the brush or pad driver, grip the 
disk and give it a quick turn.

4.  Machines equipped with magnetic brush 

hubs: 

Push the new brush or pad driver under 

the scrub head and lift the brush or pad driver 
until the magnet secures the brush or pad to 
the drive hub.

Machines equipped with 3-lug brush hubs:

 

Position the three lugs into the motor hub slots 
and give the pad driver / brush a quick counter-
clockwise turn to engage hub.

Содержание SPEED SCRUB 350



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды