INTRODUCTION
This manual is available for each new model. It provides
necessary operation and maintenance instructions.
Read this manual completely and
understand the machine before
operating or servicing it.
This machine will provide excellent service. However, the
best results will be obtained at minimum costs if:
• The machine is operated with reasonable care.
• The machine is maintained regularly - per the
maintenance instructions provided.
• The machine is maintained with manufacturer supplied or
equivalent parts.
To view, print or download manuals online visit
www.tennantco.com/manuals
PROTECT THE ENVIRONMENT
Please dispose of packaging materials
and used machine components such as
batteries in an environmentally safe way
according to your local waste disposal
regulations.
Always remember to recycle.
Tennant Company
PO Box 1452
Minneapolis, MN 55440
Phone: (800) 553-8033
www.nobles.com
1-STEP, Pro-Membrane, Severe Environment, Zone Settings, and
Quiet-Mode are trademarks of Tennant Company.
Trojan® and HydroLINIK® are registered trademark of Trojan Battery
Company.
Windows 7® is a registered trademark of the Microsoft Corporation.
This product may contain portions of software that have various 3rd party
licenses. More information can be found at:
www.tennantco.com/opensource
Speci
fi
cations and parts are subject to change without notice.
Original Instructions, copyright 2017 TENNANT Company.
All rights reserved
INTENDED USE
The Speed Scrub 350 stand-on rider
fl
oor scrubber is
intended for commercial use, for example in hotels,
schools, hospitals, factories, shops, of
fi
ces and rental
businesses. It is designed to scrub hard
fl
oor surfaces
(concrete, tile, stone, synthetic, etc.) in an indoor
environment. This machine is not intended for cleaning
carpets. Use only recommended pads/brushes and
commercially available
fl
oor cleaning detergents. Do not
use this machine other than described in the Operator
Manual.
MACHINE DATA
Please
fi
ll out at time of installation for future reference.
Model No. -
Serial No. -
Installation Date -
MACHINE SERIAL NUMBER LOCATION
UNCRATING MACHINE
Carefully check machine for signs of damage. Report
damages at once to carrier. Contact distributor or Tennant
for missing items.
To uncrate the machine, remove straps, wheel blocks and
shipping brackets. Using the supplied ramp carefully back
the machine off the pallet. Make sure scrub head is in the
raised position.
ATTENTION: Do not remove machine from pallet
without using ramp, machine damage may occur.
ATTENTION: Due to the center of gravity being higher
(making it easier to tip machine) for machines without
batteries installed, use care when uncrating the
machine if it does not have batteries installed. Install
batteries before moving machine from pallet.
