EN
OPERATION
ASC- 15 / ASC- 57 (10- 11)
10
2. Connect spray gun to solution hose then connect
hose to coupler at front of machine (Figure 9).
FIG. 9
3. Turn the FORMULA ON/OFF lever to the ON
position, located at front of machine (Figure 10).
FIG. 10
NOTE:
To operate spray gun at LOW PRESSURE
without the use of Formula cleaner, turn FORMULA
ON/OFF lever to the OFF position.
4. Adjust gun to low pressure by pushing spray
nozzle outward. Turn spray nozzle counter-
clockwise for fan spray pattern (Figure 11).
FIG. 11
5. Activate pump switch. Press vacuum/blower
switch towards vacuum symbol if using gulper tool
(Figure 12).
FIG. 12
6. Starting at the furthest point in room, begin spraying
entire area from bottom to top working towards
machine. The cleaning agent may take up to 5
seconds before it starts to inject. After spraying
entire area, turn machine off and allow cleaner to
work for 5- 10 minutes (Figure 13).
FIG. 13
NOTE:
It may take pump 5- 10 seconds to prime.
Nozzle must be set at low pressure in order for pump
to prime.
FOR SAFETY: When using machine, do not spray
solution into electrical outlets, switches, fuse
boxes or on electrical appliances.
7. After applying cleaner, turn the FORMULA
ON/OFF lever to the OFF position and rinse gun
of cleaning formula.
