Noblelift AWPS23.56, Руководство по эксплуатации и безопасности

Страница: 7 / 100

7
• Check the work area for hazardous locations. Do not operate the machine in
hazardous environments unless approved for that purpose by NOBLIFT.
• Ensure that the ground conditions are adequate to support the maximum tire
load indicated on the tire load decals located on the chassis adjacent to each
wheel.
• Do not operate the machine when wind conditions exceed 28 mph (12.5 m/s).
• This machine can be operated in nominal ambient temperatures of 0
°
F to
104
°
F (-20
℃
to 40
℃
). Consult NOBLIFT to optimize operation outside of this
temperature range.
Machine Inspection
• Do not operate this machine until the inspections and functional checks have
been performed as specified in Section 2 of this manual.
• Do not operate this machine until it has been serviced and maintained according
to the maintenance and inspection requirements as specified in the machine’s
Service and Maintenance Manual.
• Ensure all safety devices are operating properly. Modification of these devices is
a safety violation.
MODIFICATION OR ALTERATION OF AN AERIAL WORK PLATFORM SHALL
BE MADE ONLY WITH PRIOR WRITTEN PERMISSION FROM THE
MANUFACTURER.
• Do not operate any machine on which the safety or instruction placards or decals
are missing or illegible.
• Check the machine for modifications to original components. Ensure that any
modifications have been approved by NOBLIFT.
• Avoid accumulation of debris on platform deck. Keep mud, oil, grease, and other
slippery substances from footwear and platform deck.
1.3 OPERATION
General
• Do not use the machine for any purpose other than positioning personnel, their
tools, and equipment.
• Before operation, the user must be familiar with the machine capabilities and
operating characteristics of all functions.
• Never operate a malfunctioning machine. If a malfunction occurs, shut down the