Noblelift AWPS23.56, Руководство по эксплуатации и безопасности

Страница: 34 / 100

34
4.4 STEERING
To steer the machine, the thumb operated steer control switch on the
controller handle is positioned to the right for traveling right, or to the left for
traveling left. When released, the switch will return to the center-off position
and the wheels will remain in the previously selected position. To return the
wheels to the straightened position, the switch must be activated in the
opposite direction until the wheels are centered.
4.5 DRIVING
DO NOT DRIVE WITH PLATFORM RAISED EXCEPT ON A SMOOTH, FIRM
AND LEVEL SURFACE FREE OF OBSTRUCTIONS AND HOLES.
TO AVOID LOSS OF TRAVEL CONTROL OR UPSET ON GRADES AND
SIDESLOPES, DO NOT DRIVE MACHINE ON GRADES OR SIDESLOPES
EXCEEDING THOSE SPECIFIED. REFERENCE FIGURE 4-1., GRADE AND
SIDESLOPE.
Driving Forward
1. Place power selector switch at ground control station to "Platform."
2. Position emergency stop switch at platform control station to "On" position.
3. Select "Drive" on the drive/lift select switch.
4. Squeeze controller (joystick), depressing red trigger on front of joystick, and
move joystick forward for duration of travel. The drive system is proportional so
for additional drive speed, push the joystick further in the direction of travel.
Releasing the trigger will stop the function being operated.
Driving in Reverse
1. Position power selector switch at ground control station to "Platform."
2. Position emergency stop switch at platform control station to "On" position.
3. Squeeze joystick, depressing red trigger on front of joystick, and move joystick
backward (reverse) for duration of travel. The drive system is proportional so for
additional drive speed, push the joystick further in the direction of travel.
Releasing the trigger will stop the function being operated.
Figure 4-1. Grade and Sideslope